Miflex XTR Braided Inflator Hose – black – 0.40 m
RM147.00
The Miflex XTR Braided Inflator Hose – black – 0.40 m is a dive hose from Miflex – the flexible connection between your regulator or BCD and your tank. Reinforced, pressure-rated, and built to last thousands of dives without cracking or leaking at Tioman’s diverse coral gardens.
The Miflex XTR Braided Inflator Hose – black – 0.40 m is a dive hose from Miflex – the flexible connection between your regulator or BCD and your tank. Reinforced, pressure-rated, and built to last thousands of dives without cracking or leaking at Tioman’s diverse coral gardens.
Technical Specifications
| Specification | Details |
| Brand | Miflex |
| Product | XTR Braided Inflator Hose – black – 0.40 m |
| Type | LP Hose |
| Material | Reinforced rubber |
| Length | – |
| Connection | Standard fittings |
| Best For | BCD inflation / Regulator |
Key Features
- Reinforced walls: Handles high pressure without expanding or bursting.
- Flexible routing: Bends easily – routes cleanly around your rig.
- Standard fittings: Connects to any regulator or BCD without adapters.
- Salt-water resistant: Built for decades of diving without degrading.
Suited for Malaysian Dive Sites
The Miflex XTR Braided Inflator Hose – black – 0.40 m is built to perform across Malaysia’s best underwater destinations. Whether you’re exploring Tioman’s diverse coral gardens, or heading to new reefs and wrecks, this gear delivers the reliability and comfort you need on every dive.
Care & Maintenance
- Rinse after every dive – especially the connection points.
- Inspect for cracks or bulges regularly.
- Replace immediately if you see any damage – a burst hose is dangerous.
- Cap the connections when storing.
Final Verdict
Not glamorous, but critical. The Miflex XTR Braided Inflator Hose – black – 0.40 m connects your gear reliably, dive after dive – the kind of component you only notice when it fails.
| Product Category | Diving Fins |
|---|---|
| Colour | Black, Coral |
| Size | S |
| Material | Rubber |
| Skill Level | Advanced |
12 reviews for Miflex XTR Braided Inflator Hose – black – 0.40 m
Add a review
Related products
Dive Knives & Cutting Tools
Zheng Yihong –
Was really surprised by just how flexible this inflator hose is! The braided design seems to be very durable. However, the supplied clip felt a bit flimsy, but it’s not a deal-breaker.
Aquilina Tingcruz –
For a long-time, I’ve hunted for the ideal braided inflator hose, and eventually, I found it! Miflex XTR appears beautiful in look. Before using it, I noticed some really slight signs of looseness but I’m wondering if I just got a bit of a lemon, maybe.
Nur Alif –
The braided design is so durable, will not easily tear like plastic or rubber. Highly recommended!
Aung Khant –
I am absolutely blown away by the quality of this inflator hose! I can inflate my scuba gear in no time!
Jovita Wong –
I had a very bad bad experience while trying to remove the inflator, how to make it easy and quick to disconnect without having to stretch the tube too much? So far I really like this product, though.
Imran Hanafiah –
Hello Jovita, thank you for sharing your experience with our Miflex XTR Braided Inflator Hose. We apologize for the difficulty you’ve encountered while trying to disconnect the inflator. At a medium pressure of 0.40 m, we understand that stiffness can become a bit more pronounced. To make disconnection easier, you can try gently rotating the inflator while pulling the hose away from the inflator. This can help to loosen any stress that may be causing the hose to be more rigid. If you find that this solution doesn’t work for you, please feel free to contact our customer support team, and we’ll be more than happy to assist you further.
Jerwin Raj –
This inflator hose works wonders although there is a slight slight discolouration of the braided pattern after getting wet it is not too noticeable.
Zeng Weiming –
What does it feel like to make this inflator hose in a sustainable way?
Junhao Lo –
Thank you for reaching out and sharing your thoughts on sustainability. Unfortunately, we were unable to find any information about making this product in a sustainable way from our suppliers. However, we source high-quality materials and aim to reduce waste in our production processes. We appreciate your suggestion and will consider exploring more sustainable practices in the future. Kindly note that we strive to be eco-friendly in every possible way, but sometimes we may not be perfect.
Ye Liu –
How long is this inflator hose exactly? I’m worried that it might not be long enough for my diving gear.
Junhao Lo –
Thank you for your question, Ye Liu. The Miflex XTR Braided Inflator Hose you’re looking at is indeed 0.40m long, suitable for most standard inflator to first stage connections. If you’re concerned about the length, you may want to consider our other options, however, this one should be sufficient for most diving gear.
Alexis Adrien –
The quality of Miflex XTR performed quite well, is this suitable for a serious diver to use, I’m still not sure but I really enjoy having it by my side all the time?
Imran Hanafiah –
Thank you for taking the time to share your thoughts on our Miflex XTR Braided Inflator Hose. I’m glad to hear that the quality has performed well for you so far. As a serious diver, you’ll appreciate its durability and flexibility. One thing to note is that this hose is designed for medium-pressure use, so make sure to check your equipment’s specifications before using it. The fact that you enjoy having it by your side is a great endorsement! We’re always looking for ways to improve, so any feedback you have would be greatly appreciated. Thanks again for your review!
Kushna Soerawoko –
I was expecting it would be full braided but the middle part has a synthetic tube. But overall still very happy with it!
Claudia Wong –
Would it be a good idea to extend the length of Miflex XTR if one needs a longer hose line? But anyway, this braided hose works excellent, the installation was easy, the braid pattern looked amazing, no leakages observed.
Junhao Lo –
Thank you for sharing your satisfaction with the Miflex XTR Braided Inflator Hose! It’s great to hear that the installation was easy and the braid pattern looks amazing. Regarding your question about extending the length of the hose, an extension might void any manufacturer warranties. However, you can consider purchasing a longer version of the hose or check if our company offers customization options. We’d be happy to discuss this further with you.
Darius Leong –
I noticed that using inflator tubing for air supply can be so tiring, is it normal or can we find a more efficient way to achieve this? For now, I still finding the Miflex XTR really comfortable to use!
Imran Hanafiah –
Thank you for sharing your thoughts about the Miflex XTR Braided Inflator Hose, Darius! We’re glad to hear that it’s comfortable to use. As for finding a more efficient way to achieve air supply, we understand your concern. Have you considered looking into air compressor units that can reduce the manual effort required for inflating? We also want to inform you that the Miflex XTR is designed to reduce fatigue, as it’s a highly flexible hose suitable for medium-pressure applications. If you have any further questions or need more information, please don’t hesitate to ask.