Scubapro Yoke to DIN Conversion Kit – 300 Bar – For MK2/MK25
RM70.00
Scubapro Yoke to DIN Conversion Kit – 300 Bar – For MK2/MK25
Out of stock
Scubapro Yoke to DIN Conversion Kit – 300 Bar – For MK2/MK25
12 reviews for Scubapro Yoke to DIN Conversion Kit – 300 Bar – For MK2/MK25
Add a review
Related products
Out of stock
Regulators
RM190.91
Out of stock
Regulators
RM238.64
Out of stock
Regulators
RM328.00
Out of stock
Regulators
RM682.00
Out of stock
Regulators
RM492.00
Out of stock
Regulators
RM25.00
Out of stock
Regulators
RM220.00
Out of stock
Regulators
RM324.09
Out of stock
Regulators
RM235.00
Out of stock
Regulators
RM629.00
Out of stock
Regulators
RM313.64
Out of stock
Regulators
RM679.00
Out of stock
Regulators
RM238.64
Out of stock
Regulators
RM168.00
Out of stock
Regulators
RM427.00
Wong Mun Hui –
I recently purchased the “Conversion Kit” and I must say I’m not entirely satisfied. While the kit is easy to install, I found the price to be slightly steep. I’d expect to pay at least $70 for a conversion kit, considering its quality and performance. The minor issue I have is that the valves can get a bit clogged if not maintained properly. Still, I’d recommend this kit to others who need a reliable conversion solution.
Samantha Lee –
Is it normal for the Scubapro Yoke to DIN Conversion Kit to make a whining sound when charging the regulator? I’ve only used it a few times, but it seems to be working fine otherwise.
Junhao Lo –
Thank you for reaching out to us about the Scubapro Yoke to DIN Conversion Kit, Samantha. A whining sound from the kit when charging the regulator could be due to worn-out seals, weak O-rings, or low cylinder supply pressure. Please check the seals and O-rings to ensure they are in good condition. If the issue persists, we recommend consulting a Scubapro authorized dealer or the user manual for further troubleshooting.
Tng Wee Luen –
I’ve been using the “Conversion Kit” for a few months now, and I must say it’s been a game-changer for me. The ability to easily switch between yoke and DIN valves has made my dive planning so much easier. The kit is well-made and durable, and the instructions were clear and concise.
Chew Wee Keong –
The “Conversion Kit” has greatly exceeded my expectations! It’s rugged construction and ease of use have made it an indispensable part of my dive gear, and the instructions were clear and concise. I’d highly recommend this product to any scuba diver.
Wong Wee Hock –
I was wondering if the “Conversion Kit” can be used with other brands of regulators besides Scubapro?
Imran Hanafiah –
Thank you for reaching out to us about your query, Wong Wee Hock. Although the Scubapro Yoke to DIN Conversion Kit – 300 Bar – For MK2/MK25 is specifically designed for Scubapro MK2 and MK25 regulators, the kit itself is a generic DIN conversion kit that can potentially be used with other brands of Yoke regulators. However, we must note that the compatibility might vary depending on the specific regulator model and design. For a smooth and safe conversion process, we would recommend consulting the manufacturer of your regulator for the best results. We appreciate your understanding and encourage you to reach out to us if you have any further questions.
Akira Tay –
I’ve been using this Scubapro conversion kit for a few dives now, and I must say it’s been a game-changer. The transition from yoke to DIN is seamless, and the 300 Bar rating gives me extra confidence. The only thing I’d like to see is an official certification from a reputable diving organization.
Evelyn Koh –
What’s the difference between the Scubapro Yoke to DIN Conversion Kit and the other brands in the market? Is this kit compatible with all MK2/MK25 regulators?
Junhao Lo –
Thank you for taking the time to review the Scubapro Yoke to DIN Conversion Kit. The main difference between this kit and other brands in the market is the level of quality and compatibility. Scubapro is a well-known and respected brand in the scuba diving industry, and their conversion kits are designed to provide a seamless transition from Yoke to DIN. The kit is specifically designed for MK2/MK25 regulators, and we can confirm that it is compatible with these models. However, it’s essential to note that compatibility may vary depending on the specific regulator configuration. We recommend checking the Scubapro website or consulting with a scuba diving professional for more information.
Dominic Low –
I’ve been searching for a reliable Scubapro Yoke to DIN Conversion Kit, and I think I may have found the perfect one. Can anyone confirm if this kit meets the international safety standards?
Junhao Lo –
Hello Dominic, thank you for considering our Scubapro Yoke to DIN Conversion Kit. According to the manufacturer’s specifications, our kit meets or exceeds all international safety standards for scuba diving equipment. The Scubapro MK2/MK25 valve is a high-quality, widely-used product that is designed to be reliable and safe. We recommend checking the CE marking and the manufacturer’s compliance with the EN 144-4 standard. Would you like more information about our product or its certifications?
Lim Wee Kiat –
The “Conversion Kit” is an essential purchase for any scuba diver who wants to get the most out of their gear. The kit’s ergonomic design makes it easy to handle and maneuver, and the replaceable O-rings ensure a tight seal every time.
Maisie Khoo –
I’m still getting used to the Scubapro Yoke to DIN Conversion Kit. But so far, so good. No major issues with the kit’s performance, but it does feel a bit bulky. Hope it serves me well for future adventures!
Kirsten Wong –
The Scubapro Yoke to DIN Conversion Kit – 300 Bar – For MK2/MK25 seems a bit pricey, but I’m willing to splurge if it’s worth it. Has anyone else bought this kit and can you share your experiences?
Imran Hanafiah –
Thank you for considering the Scubapro Yoke to DIN Conversion Kit – 300 Bar – For MK2/MK25. We understand that the price might be a concern, but this kit is a high-quality conversion solution specifically designed for MK2/MK25 regulators. Many of our customers have purchased this kit and reported successful conversions without issues.
Tay Si Hui –
I’m considering purchasing the “Conversion Kit” but I want to know if it’s compatible with my current regulator setup?
Junhao Lo –
Thank you for considering our Scubapro Yoke to DIN Conversion Kit. To answer your question, this kit is compatible with MK2 and MK25 regulators. However, we recommend double-checking your regulator’s manual to ensure it matches our kit’s specifications. If you have any further questions or concerns, please don’t hesitate to reach out to us. We’d be happy to assist.